AEON MIRA 9 Laser
Overall Review
AEON MIRA 9 laser is a Commercial-grade desktop laser engraving machine. The working area is 900*600mm. In this size, the designer got much more space to build inside the real compressor-type water chiller. You could now control the water temperature a lot more easily. There is a temperature display on the chiller for you to monitor the water temperature. The exhaust blower and the air compressor are also enlarged than that of MIRA7. Therefore, you could install a higher-power laser tube of up to 100W on this model. This makes it possible for you could accommodate a powerful commercial Laser cutter in a small home or business that got very limited space.
This model has a blade-cutting table as well as a honeycomb table. The air assists and exhaust blower installed inside are more powerful. The whole machine is built according to Class 1 Laser standard. The case is fully enclosed. Every door and window has locks, and also, it also has a key lock for the main switch to prevent a non-authorized person from accessing the machine.
As a member of the MIRA Series, the MIRA 9 CO2 cutting & engraving machine’s engraving speed is also up to 1200mm/sec. The acceleration speed is 5G. The dust-proof guide rail ensures the engraving outcome is perfect. The red beam is the combiner type, which is the same as the laser path. Further, you could choose autofocus and WIFI to get an easier operation experience.
Overall, The MIRA 9 CO2 laser machine is a commercial-grade desktop laser engraving and cutting machine. It can meet your requirements for speed, power, and running time. And further, you could install a more powerful laser tube for deep cutting. It will be a very good option for your business and will bring you profit constantly.
Advantages of the MIRA 9 Laser
What materials can Mira 9 Laser cut/engrave?
| Laser Cutting | Laser Engraving |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
*Cannot cut hardwoods like mahogany
*CO2 lasers only mark bare metals when anodized or treated.
How Thick can a Mira 9 Laser Machine Cut?
MIRA 9 laser‘s Cutting Thickness is 10mm 0-0.39 inch (depends on different materials)
Show Details
MIRA 9 Laser – Packaging and Transportation
If you need a big power and working area laser machine, we also have the Newest Nova Super series and Nova Elite series. Nova super is our newest dual RF & Glass DC tubes in one machine, and fast engraving speed up to 2000mm/s. Nova elite is a glass tube machine, that can add 80W or 100 laser tubes.
MIRA 9 Laser FAQ
Is the Mira 9 a CO2 laser?
The Mira 9 is a professional benchtop CO2 laser that includes the safety of a fully interlocked case and a keyed ignition.
How thick can a Mira 9 cut?
The cutting thickness of the MIRA 9 laser is 0-10mm(depending on different materials ).
What can Mira 9 cut?
Plastics, acrylic, Wood, plywood, MDF, solid wood, paper, cardboard, leather, and some other non-metallic materials.
Does the Mira 9 have a pass through?
The MIRA 9 laser does not have a pass-through, but the front access panel can be lowered to accommodate larger materials.
What is the bed size of a Mira 9 Laser?
The MIRA 9 laser has a 600 x 900mm electric up-and-down worktable.